modèle

AirEngine 5760-22W

Numéro de pièce

02353KBE

Description Description

AirEngine5760-22W (11ax indoor, 2+4 dual bands, smart antenna, USB USB, BLE, PSE)

Type d’installation

Wall, Junction Box

Dimensions sans emballage (H x l x p) [mm(po.)]

170 mm x 86 mm x 74 mm (6.69 in. x 3.39 in. x 2.91 in.)

Poids sans emballage [kg(lb)]

0.70 kg (1.54 lb)

stockage

NAND Flash 512 MB; NOR Flash 16 MB

Port Console

BLE console

Consommation d’énergie maximale [W]

25.29 (excluding USB and PoE OUT ports)

Dissipation thermique maximale [BTU/ heure]

86.3 (without USB and PoE OUT)

Mode d’alimentation d’énergie

PoE, DC power adapter

Tension d’entrée nominale [V]

48 V

Gamme de tension d’entrée [V]

DC: 43.2 V to 57.6 V

PoE: 802.3bt/at

Port de Service protection contre les surtensions

PoE port:

Differential mode (48 V-RTN): 0,5 0,5 0,5 0,5 0,5 kV (1.2/50 us, 42 ohms), criterion B

Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B

PoE

Pris en charge

Puissance de sortie PoE maximale [W]

13.6 W (When the maximum transmission distance through a CAT5E Ethernet cable is 40 m, the port can connect to an 802.3af-compliant PD requiring power of less than 12.95 W.)

Nombre Maximum de ports physiques sur l’ensemble du périphérique

2.5GE (RJ45) x 1, 10M/100M/1000M/2.5GE auto-sensing

GE (RJ45) x 4, 10M/100M/1000M auto-sensing

10GE optical port (SFP+), GE/10GE auto-sensing

Température de fonctionnement à long terme [°C(°F)]

0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)

Température de stockage [°C(°F)]

-40 °C à +70°C

Humidité relative de fonctionnement à long terme [RH]

5% hr à 95% hr, sans condensation

Altitude d’exploitation à long terme [m(ft.)]

–60 m to +5000 m (–196.85 ft to +16404.20 ft)

Atmospheric pressure [kPa]

53kPa - 106kPa ETSI 300 019-2-3

La terre

floating ground

USB

USB 2,0

IoT slot

IoT extension by USB

BLE

BLE5.0

Radio number

2

Operating frequency band

2.4GHz,5GHz

MIMO spatial streams

Radio 0 (2.4 GHz): 2x2, maximum bandwidth of 40 MHz

Radio 1 (5 GHz): 4x4, maximum bandwidth 160 MHz

Wi-Fi standard

2.4 GHz: 802.11b/g/n/ax

5 GHz: 802.11a/n/ac/ac Wave 2/ax

Radio interface

Built-in smart antennas

Antenna gain

2.4 GHz: 4 dBi

5 GHz: 5 dBi

BLE: 4 dBi

Maximum transmit power

2.4 GHz: 23 dBm

5 GHz: 26 dBm

(Note: This is the total MIMO radio power, the same as:

2.4 GHz: 20 dBm/chain

5 GHz: 20 dBm/chain)

BLE: < 10 dBm

MTBF [année]

37

MTTR [heure]

0.5

Frequency stability [ppm]

+/-20

802.3bt power supply description

Wi-Fi:

- If no optical port is used, Wi-Fi is not restricted.

- If optical ports are used, Wi-Fi supports only the 2.4 GHz (2x2, 20 MHz bandwidth) + 5 GHz (2x2, 80 MHz bandwidth) working mode, and the radio transmit power is not affected.

Wired network port: The 2.5GE electrical port and SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The four downlink ports are all available.

Other ports: not restricted

802.3at power supply description

Wi-Fi:

- If the USB and PoE out ports are not used and only the 2.5GE electrical port is used as the uplink port, Wi-Fi supports the 2.4 GHz (2x2, 20 MHz bandwidth) + 5 GHz (4x4, 80 MHz bandwidth) working mode, and the radio transmit power is not affected.

- If an optical port or the 2.5 W USB port is used, Wi-Fi supports only the 2.4 GHz (2x2, 20 MHz bandwidth) + 5 GHz (2x2, 80 MHz bandwidth) working mode, and the radio transmit power is not affected.

Wired network port: The 2.5GE electrical port and SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The four downlink ports are all available.

Other ports: Only the 2.5 W USB port is supported. The 5 W USB port and PoE OUT port are unavailable.

802.3af power supply description

The 802.3af power supply is not supported.

DC power supply description

Wi-Fi:

- If no optical port is used, Wi-Fi is not restricted.

- If optical ports are used, Wi-Fi supports only the 2.4 GHz (2x2, 20 MHz bandwidth) + 5 GHz (2x2, 80 MHz bandwidth) working mode, and the radio transmit power is not affected.

Wired network port: not restricted

Other ports: not restricted