modèle

AirEngine 5760-51

Numéro de pièce

02353GES, 02353GES-001

Description Description

AirEngine5760-51(11ax indoor, 2+4 dual bands, smart antenna, USB USB, IoT Slot, BLE, Optional RTU upgrade to 4+4/2+2+4/2+4+Scan)

Type d’installation

Wall, Ceiling, T-Rail

Dimensions sans emballage (H x l x p) [mm(po.)]

Diameter x depth: 220 mm x 51 mm (8.66 in. x 2.01 in.)

Dimensions avec emballage (H x l x p) [mm(po.)]

94 mm x 306 mm x 285 mm (3.70 in. x 12.05 in. x 11.22 in.)

Poids sans emballage [kg(lb)]

1.15 kg (2.53 lb)

stockage

NAND Flash 512 MB; NOR Flash 16 MB

Port Console

BLE console

Consommation d’énergie maximale [W]

28.8 (excluding USB and IoT cards)

Dissipation thermique maximale [BTU/ heure]

98.3 (without USB or IoT card)

Mode d’alimentation d’énergie

PoE, DC power adapter

Tension d’entrée nominale [V]

48 V

Gamme de tension d’entrée [V]

DC: 43.2 V to 57.6 V

PoE: 802.3bt/at

Port de Service protection contre les surtensions

PoE port:

Differential mode (48 V-RTN): 0,5 0,5 0,5 0,5 0,5 kV (1.2/50 us, 42 ohms), criterion B

Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B

Nombre Maximum de ports physiques sur l’ensemble du périphérique

5GE (RJ45) x 1, 10M/100M/1000M/2.5GE/5GE auto-sensing

GE (RJ45) x 1, 10M/100M/1000M auto-sensing

Température de fonctionnement à long terme [°C(°F)]

–10°C to +50°C (14°F to 122°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)

Température de stockage [°C(°F)]

-40 °C à +70°C

Humidité relative de fonctionnement à long terme [RH]

5% hr à 95% hr, sans condensation

Altitude d’exploitation à long terme [m(ft.)]

–60 m to +5000 m (–196.85 ft to +16404.20 ft)

Atmospheric pressure [kPa]

53kPa - 106kPa ETSI 300 019-2-3

La terre

La terre

USB

USB 2,0

IoT slot

IoT card

BLE

BLE5.2

Radio number

2/3

Operating frequency band

2.4GHz,5GHz

MIMO spatial streams

Triple-radio mode:

- Radio 0 (2.4 GHz): 2x2, maximum bandwidth of 40 MHz

- Radio 1 (5 GHz): 2x2 (high frequency band), maximum bandwidth of 80 MHz

- Radio 2 (5 GHz): 4x4 (low frequency band), maximum bandwidth of 80 MHz

Dual-radio mode:

- Radio 0 (2.4 GHz): 4x4, maximum bandwidth of 40 MHz

- Radio 1 (5 GHz): 4x4, maximum bandwidth 160 MHz

Wi-Fi standard

2.4 GHz: 802.11b/g/n/ax

5 GHz: 802.11a/n/ac/ac Wave 2/ax

Radio interface

Built-in smart antennas

Antenna gain

2.4 GHz: 4.5 dBi

5 GHz: 5.5 dBi

BLE: 4 dBi

Maximum transmit power

2.4 GHz: 26 dBm

5 GHz: 26 dBm

(Note: This is the total MIMO radio power, the same as:

2.4 GHz: 20 dBm/chain

5 GHz: 20 dBm/chain)

BLE: < 10 dBm

MTBF [année]

69.7

MTTR [heure]

0.5

Frequency stability [ppm]

+/-20

802.3bt power supply description

For 802.3bt class 6/class 8 power supply:

If an RTU license is loaded, no function is restricted.

If no RTU license is loaded, Wi-Fi supports only the following mode and other functions are not restricted:

- Dual-radio mode: 2.4 GHz (2x2) + 5 GHz (4x4)

- Triple-radio mode: 2.4 GHz (2x2) + 5 GHz (2x2, high band) + 5 GHz (2x2, low band)

802.3at power supply description

With an RTU license loaded:

Wi-Fi:

If the USB and IoT card slots are not used, the radio transmit power is not affected.

- Dual-radio mode: 2.4 GHz (4x4) + 5 GHz (4x4)

- Triple-radio mode: 2.4 GHz (2x2) + 5 GHz (2x2, high band) + 5 GHz (4x4, low band)

- Dual-radio + independent radio scanning mode: 2.4 GHz (2x2) + 5 GHz (4x4) + 5 GHz independent radio scanning

If the USB and IoT card slot are both used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager.

Wired network port:

The speed of the 5GE electrical port is reduced to 2.5GE or lower. (In V200R021C10 and later versions, the GE electrical port is also available in standard dual-radio mode.)

Other ports:

Either the 5 W USB port or IoT card slot can be used at the same time. The IoT card slot takes precedence. If both of them are used, Wi-Fi can only work in dual-radio mode and the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager.

Without an RTU license loaded:

Wi-Fi:

If no USB or IoT card slot is used, the radio transmit power is not affected.

- Dual-radio mode: 2.4 GHz (2x2) + 5 GHz (4x4)

- Triple-radio mode: 2.4 GHz (2x2) + 5 GHz (2x2, high band) + 5 GHz (2x2, low band)

If the USB and IoT card slot are both used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager.

Wired network port:

The speed of the 5GE electrical port is reduced to 2.5GE or lower. (In V200R021C10 and later versions, the GE electrical port is also available in standard dual-radio mode.)

Other ports:

Either the 5 W USB port or IoT card slot can be used at the same time. The IoT card slot takes precedence. If both of them are used, Wi-Fi can only work in dual-radio mode and the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact the product manager.

DC power supply description

If an RTU license is loaded, no function is restricted.

If no RTU license is loaded, Wi-Fi supports only the following mode and other functions are not restricted:

- Dual-radio mode: 2.4 GHz (2x2) + 5 GHz (4x4)

- Triple-radio mode: 2.4 GHz (2x2) + 5 GHz (2x2, high band) + 5 GHz (2x2, low band)