modèle

AirEngine 8760R-X1

Numéro de pièce

02353GSF, 02353GSF-001

Description Description

AirEngine8760R-X1 (11ax outdoor, 8+8 dual bands, smart antenna, BLE, PSE)

Type d’installation

Wall, Pole

Dimensions sans emballage (H x l x p) [mm(po.)]

Diameter x length: 165 mm x 387 mm (6.50 in. x 15.24 in.)

Poids sans emballage [kg(lb)]

4.15 kg (9.15 lb)

stockage

NAND Flash 512 MB; NOR Flash 16 MB

Port Console

BLE console

Consommation d’énergie maximale [W]

53.2 (excluding PoE OUT)

Dissipation thermique maximale [BTU/ heure]

181.5 (without PoE OUT)

Mode d’alimentation d’énergie

PoE

Gamme de tension d’entrée [V]

PoE: 802.3bt

Port de Service protection contre les surtensions

6 kA in common mode

Puissance de sortie PoE maximale [W]

15.4 W

Nombre Maximum de ports physiques sur l’ensemble du périphérique

10GE (RJ45) x 1, 10M/100M/1000M/2.5GE/5GE/10GE auto-sensing

GE (RJ45) x 1, 10M/100M/1000M auto-sensing

10GE optical port (SFP+), GE/10GE auto-sensing

Température de fonctionnement à long terme [° ° c ° cC(°F)]

–40°C to +65°C (–40°F to +149°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)

Température de stockage [°C(°F)]

–40°C to +85°C (–40°F to +185°F)

Humidité relative de fonctionnement à long terme [RH]

0% RH to 100% RH

Altitude d’exploitation à long terme [m(ft.)]

–60 m to +5000 m (–196.85 ft to +16404.20 ft)

Atmospheric pressure [kPa]

53kPa - 106kPa ETSI 300 019-2-3

Niveau de protection contre les infiltrations (antipoussière/imperméable à l’eau)

IP68

La terre

Mise à la terre

Wind resistance

67 m/s

USB USB

Non pris en charge

IoT slot

Non pris en charge

BLE

BLE5.2

Radio number

2

Operating frequency band

2.4GHz,5GHz

MIMO spatial streams

Dual-radio standard mode:

- Radio 0 (2.4 GHz): 4x4:4

- Radio 1 (5 GHz): 12x12:8

Dual-radio 2G enhanced mode:

- Radio 0 (2.4 GHz): 8x8:4 (A maximum of four antennas can be used to transmit and receive 802.11b packets.)

- Radio 1 (5 GHz): 8x8:8

Dual-radio + independent radio scanning mode:

- Radio 0 (2.4 GHz): 4x4:4

- Radio 1 (5 GHz): 8x8:8

Wi-Fi standard

2.4 GHz: 802.11b/g/n/ax

5 GHz: 802.11a/n/ac/ac Wave 2/ax

Radio interface

Built-in directional antennas

Antenna gain

2.4G: 10 dBi

5G: 11 dBi

BLE: 5 dBi

Beamwidth of the built-in antenna [degrees]

2.4 GHz:

- Horizontal plane: 180° @ 6 dB, 70° @ 3 dB

- Vertical plane: 40°

5 GHz:

- Horizontal plane: 180° @ 6 dB, 100° @ 3 dB

- Vertical plane: 20°

Maximum transmit power

2.4 GHz: 33 dBm

5 GHz: 33 dBm

(Note: This is the total MIMO radio power, the same as:

2.4 GHz: 24 dBm/chain

5 GHz: 24 dBm/chain)

BLE: < 10 dBm

MTBF [année]

60.2

MTTR [heure]

0,5 0,5 0,5 0,5 0,5

Frequency stability [ppm]

+/-20

802.3bt power supply description

In 802.3bt Class 8 power supply mode:

If the PoE OUT port is not used, no function is restricted. In enhanced dual-radio 2G mode, the 2.4 GHz radio supports 8x8:4 MIMO and a maximum of 20 MHz bandwidth.

If the PoE OUT port (supporting only 802.3af) is used, the 10GE electrical port and the SFP+ optical port work as combo ports, and when one of them is working, the other is unavailable. The GE electrical port is available. Other functions are not restricted. In enhanced dual-radio 2G mode, the 2.4 GHz radio supports 8x8:4 MIMO and a maximum of 20 MHz bandwidth.

In 802.3bt Class 6 power supply mode:

If the PoE OUT port is not used:

Wi-Fi: 

The transmit power of radios is not affected.

- Standard dual-radio mode: 2.4 GHz (4x4) + 5 GHz (12x12:8)

- Dual-radio + independent scanning radio mode: 2.4 GHz (4x4) + 5 GHz (8x8) + 5 GHz independent radio scanning

- Enhanced dual-radio 2G mode: 2.4 GHz (8x8:4) + 5 GHz (4x4). In this mode, the 2.4 GHz radio supports 8x8:4 MIMO and a maximum of 20 MHz bandwidth.

Wired network port: 

The 10GE electrical port and the SFP+ optical port work as combo ports, and when one of them is working, the other is unavailable. The GE electrical port is available.

Other ports:

The PoE OUT port is not used.

If the PoE OUT port is used:

Wi-Fi: 

The transmit power of radios is automatically adjusted.

- Standard dual-radio mode: 2.4 GHz (4x4) + 5 GHz (4x4)

- Dual-radio + independent scanning radio mode: 2.4 GHz (4x4) + 5 GHz (4x4) + independent radio scanning

Wired network port:

The 10GE electrical port and the SFP+ optical port are combo ports, and only one of them can be selected. The GE electrical port is available.

Other ports:

The PoE OUT port (supporting only 802.3af) is used.

802.3at power supply description

Wi-Fi:

The transmit power of radios is automatically adjusted.

- Standard dual-radio mode: 2.4 GHz (4x4) + 5 GHz (4x4)

- Dual-radio + independent scanning radio mode: 2.4 GHz (4x4) + 5 GHz (4x4) + independent radio scanning

Wired network port:

The 10GE electrical port and the SFP+ optical port are combo ports, and only one of them can be selected. The GE electrical port is available.

Other ports:

The PoE OUT port (supporting only 802.3af) is used.

802.3at power supply description

Wi-Fi:

The transmit power of radios is automatically adjusted.

- Standard dual-radio mode: 2.4 GHz (2x2) + 5 GHz (2x2)

- Dual-radio + independent scanning radio mode: 2.4 GHz (2x2) + 5 GHz (2x2) + independent radio scanning

Wired network port:

The rate of the 10GE electrical port is reduced to GE or lower. The 10GE electrical port and the SFP+ optical port work as combo ports for each other, and when one of them is working, the other is unavailable. The GE electrical port is unavailable.

Other ports:

The PoE OUT port is unavailable.