modèle

AirEngine 8760R-X1E

Numéro de pièce

02353GSH 02353GSH-001

Description Description

AirEngine8760R-X1E (11ax outdoor, Dedicated 3rd Radio, 8+8 dual bands, external antenna, BLE, PSE)

Type d’installation

Wall, Pole

Dimensions sans emballage (H x l x p) [mm(po.)]

Diameter x length: 165 mm x 387 mm (6.50 in. x 15.24 in.)

Poids sans emballage [kg(lb)]

4.05 kg (8.93 lb)

stockage

NAND Flash 512 MB; NOR Flash 16 MB

Port Console

BLE console

Consommation d’énergie maximale [W]

53.2 (excluding PoE OUT)

Dissipation thermique maximale [BTU/ heure]

181.5 (without PoE OUT)

Mode d’alimentation d’énergie

PoE

Gamme de tension d’entrée [V]

PoE: 802.3bt

Port de Service protection contre les surtensions

6 kA in common mode

Puissance de sortie PoE maximale [W]

15.4 W

Nombre Maximum de ports physiques sur l’ensemble du périphérique

10GE (RJ45) x 1, 10M/100M/1000M/2.5GE/5GE/10GE auto-sensing

GE (RJ45) x 1, 10M/100M/1000M auto-sensing

10GE optical port (SFP+), GE/10GE auto-sensing

Température de fonctionnement à long terme [°C(°F)]

–40°C to +65°C (–40°F to +149°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)

Température de stockage [°C(°F)]

–40°C to +85°C (–40°F to +185°F)

Humidité relative de fonctionnement à long terme [RH]

0% RH to 100% RH

Altitude d’exploitation à long terme [m(ft.)]

–60 m to +5000 m (–196.85 ft to +16404.20 ft)

Atmospheric pressure [kPa]

53kPa - 106kPa ETSI 300 019-2-3

Niveau de protection contre les infiltrations (antipoussière/imperméable à l’eau)

IP68

La terre

Mise à la terre

Antenna port surge protection [kA]

5 kA surge protection capability without external surge protection devices

Wind resistance

67 m/s

USB USB

Non pris en charge

IoT slot

Non pris en charge

BLE

BLE5.2

Radio number

2/3

Operating frequency band

2.4GHz,5GHz

MIMO spatial streams

Dual-radio standard mode:

- Radio 0 (2.4 GHz): 8x8:4 (A maximum of four antennas connected to RF ports A through D can be used to transmit and receive 802.11b packets.)

- Radio 1 (5 GHz): 8x8:8

Triple-radio mode:

- Radio 0 (2.4 GHz): 8x8:4 (A maximum of four antennas connected to RF ports A through D can be used to transmit and receive 802.11b packets.)

- Radio 1 (5 GHz): 4x4:4

- Radio 2 (5 GHz): 4x4:4

Dual-radio + independent radio scanning mode:

- Radio 0 (2.4 GHz): 4x4:4

- Radio 1 (5 GHz): 4x4:4

Wi-Fi standard

2.4 GHz: 802.11b/g/n/ax

5 GHz: 802.11a/n/ac/ac Wave 2/ax

Radio interface

Antenne externe

Antenna gain

BLE: 5 dBi

Maximum transmit power

2.4 GHz: 33 dBm

5 GHz: 33 dBm

(Note: This is the total MIMO radio power, the same as:

2.4 GHz: 24 dBm/chain

5 GHz: 24 dBm/chain)

BLE: < 10 dBm

MTBF [année]

60.2

MTTR [heure]

0,5 0,5 0,5 0,5 0,5

Frequency stability [ppm]

+/-20

802.3bt power supply description

In 802.3bt Class 8 power supply mode:

If the PoE OUT port is not used, no function is restricted. In standard dual-radio or three-radio mode, the 2.4 GHz radio supports 8x8:4 MIMO and a maximum of 20 MHz bandwidth. 

If the PoE OUT port (supporting only 802.3af) is used, the 10GE electrical port and the SFP+ optical port work as combo ports, and when one of them is working, the other is unavailable. The GE electrical port is available. Other functions are not restricted. In standard dual-radio or three-radio mode, the 2.4 GHz radio supports 8x8:4 MIMO and a maximum of 20 MHz bandwidth. 

In 802.3bt Class 6 power supply mode:

If the PoE OUT port is not used:

Wi-Fi: The transmit power of radios is not affected.

- Standard dual-radio mode: 2.4 GHz (4x4) + 5 GHz (8x8)

- Dual-radio + independent scanning radio mode: 2.4 GHz (4x4) + 5 GHz (4x4) + 5 GHz independent scanning radio

- Triple-radio mode: 2.4 GHz (4x4) + 5 GHz (4x4) + 5 GHz (4x4)

Wired network port: The 10GE electrical port and the SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The GE electrical port is available.

Other ports: The PoE OUT port is not used.

If the PoE OUT port is used:

Wi-Fi: The radio power is self-adapted.

- Standard dual-radio mode: 2.4 GHz (4x4) + 5 GHz (4x4)

- Dual-radio + independent scanning radio mode: 2.4 GHz (4x4) + 5 GHz (4x4) + 5 GHz independent scanning radio

- Triple-radio mode: 2.4 GHz (2x2) + 5 GHz (2x2) + 5 GHz (2x2)

Wired network port: The 10GE electrical port and SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The GE electrical port is available.

Other ports: The PoE OUT port (supporting only 802.3af) is used.

802.3at power supply description

Wi-Fi: The radio power is self-adapted.

- Standard dual-radio mode: 2.4 GHz (2x2) + 5 GHz (2x2)

- Dual-radio + independent scanning radio mode: 2.4 GHz (2x2) + 5 GHz (2x2) + 5 GHz independent scanning radio

- Triple-radio mode: 2.4 GHz (2x2) + 5 GHz (2x2) + 5 GHz (2x2)

Wired network port: The rate of the 10GE electrical port rate is reduced to GE or lower and works with the SFP+ optical port as combo ports. When one of them is working, the other is unavailable. The GE electrical port is not available.

Other ports: The PoE OUT port is unavailable.