Introduction to Huawei CloudEngine S5731-S24P4X

The Huawei CloudEngine S5731-S24P4X is a high-performance, next-generation gigabit access switch designed to meet the demands of modern enterprise networks....... Built on Huawei's Versatile Routing Platform (VRP) voir aussi: voir aussi:, this switch offers enhanced Layer 3 features, simplified operations and maintenance (O&M), intelligent stacking (iStack), flexible Ethernet networking, and mature IPv6 capabilities.

Key Features

▪ High-Performance Hardware: Equipped with 24 x 10/100/1000BASE-T PoE+ ports and 4 x 10GE SFP+ uplink ports, ensuring robust connectivity.
▪ Advanced Layer 3 Capabilities: Supports comprehensive Layer 3 routing protocols, including OSPF, IS-IS, BGP, and VRRP.
▪ Intelligent Stacking (iStack): Allows multiple switches to be managed as a single entity, simplifying network management.
▪ Enhanced Security Features: Offers features like MAC address authentication, 802.1X, and port security to safeguard the network.
▪ Flexible Power Options: Supports various power modules, including 600W and 1000W PoE AC power supplies.

Spécifications techniques

Ports: 24 x 10/100/1000BASE-T PoE+ ports, 4 x 10GE SFP+ uplink ports
Switching Capacity: 128 Gbps
Forwarding Performance: 96 Mpps
Memory: 1 GB RAM, 1 GB Le Flash
Power Supply: Supports 600W and 1000W PoE AC power modules
Dimensions: 43.6 mm x 442 mm x 420 mm
Weight: Approximately 8.6 kg
Operating Temperature: 0°C to 50°C
Humidity: 5% to 95% (non-condensing)

Deployment Scenarios

The S5731-S24P4X is ideal for various deployment scenarios, including: 

▪ Enterprise Campus Networks: Serves as an access switch, providing high-speed connectivity to end devices.
▪ Aggregation Layer: Functions as an aggregation switch, consolidating traffic from multiple access switches.
▪ Data Center Access: Connects servers and storage devices within data centers, ensuring low-latency communication.

Sécurité et gestion

▪ Comprehensive Security: Implements features like DHCP snooping, dynamic ARP inspection, and IP source guard to prevent unauthorized access.
▪ Efficient Management: Supports SNMP, RMON, Syslog, and NTP for streamlined network management.
▪ Web-Based GUI: Offers an intuitive web interface for easy configuration and monitoring.

Energy Efficiency

The S5731-S24P4X is designed with energy efficiency in mind: 

▪ Dynamic Energy Saving: Automatically adjusts power consumption based on network traffic.
▪ Fan Speed Adjustment: Modulates fan speed according to system temperature, reducing noise and power usage.
▪ PoE Management: Provides intelligent PoE management, delivering power only when needed.

Conclusion Conclusion

The Huawei CloudEngine S5731-S24P4X stands out as a versatile and high-performance switch, suitable for various network environments. Its robust feature set, combined with energy-efficient design and comprehensive security measures, makes it an excellent choice for enterprises seeking reliable and scalable network solutions.

Huawei CloudEngine Switch S5731-S24P4X (02353AHX/-001/-003/-004)

Huawei All Les séries Switches New and Used

For Huawei product list and quote, please visit: https://www.hi-network.com/categories/huawei or contact us at www.hi-network.com  (Email: [email protected])

S5731-S24P4X (02353AHX/02353AHX-001/02353AHX-003)

Version Mapping

Table 4-1316 lists the mapping between the S5731-S24P4X chassis and software versions.

Table 4-1316 Version mapping

Series	modèle	Version du logiciel
S5731-S	S5731-S24P4X	02353AHX: V200R019C00 and later versions 02353AHX-001: V200R020C10 and later versions 02353AHX-003: V200R021C10SPC600 and later versions (If V200R021C10SPC500 is used, install V200R021HP0121 or a later patch.)

Appearance and Structure

Figure 4-520 S5731-S24P4X (02353AHX) appearance

Figure 4-521 S5731-S24P4X (02353AHX-001/02353AHX-003) appearance

1	Vingt-quatre ports PoE+ 10/100/1000BASE-T	2	Quatre ports 10GE SFP+ Modules et câbles applicables: GE module optique Module optique GE-CWDM GE-DWDM module optique GE copper module (100M/1000M auto-sensing) 10GE SFP+ module optique (OSXD22N00 non pris en charge) 10GE-CWDM module optique 10GE-DWDM module optique PEN remote optical modules (V200R024C00 and later versions) 1 m, 3 m, 5 m et 10 m SFP+ câbles cuivre haute vitesse Câbles SFP+ AOC de 3 m et 10 m 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking)
3	Un port de console	4	Un port de gestion ETH
5	Un port USB	6	Un bouton PNP NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.
7	Vis de terre Remarque: It is used with a ground cable.	8	Fente de module de Fan 1 Remarque: Applicable fan module: FAN-023A-B (Fan Box (B, Fan Panel Side Exhaust))
9	Fente de module de Fan 2 Remarque: Applicable fan module: FAN-023A-B (Fan Box (B, Fan Panel Side Exhaust))	10	Emplacement de module de puissance 1 Remarque: Applicable power module: PAC1000S56-CB (02312KND: 1000 W PoE AC&240 V DC Power Module) PAC1000S56-CB (02312KND-001: 1000 W PoE AC&240 V DC Power Module) (applicable in V200R019C10 and later versions) PAC1000S56-DB (1000 W PoE AC&240 V DC Power Module) (applicable in V200R020C10 and later versions) PDC1000S56-CB (1000 W PoE DC Power Module) (applicable in V200R021C00 and later versions) PAC600S56-CB (600 W PoE AC&240 V DC Power Module (Back to Front, Power panel side exhaust)) (applicable in V200R021C10 and later versions)
11	Emplacement de module de puissance 2 Remarque: Applicable power module: PAC1000S56-CB (02312KND: 1000 W PoE AC&240 V DC Power Module) PAC1000S56-CB (02312KND-001: 1000 W PoE AC&240 V DC Power Module) (applicable in V200R019C10 and later versions) PAC1000S56-DB (1000 W PoE AC&240 V DC Power Module) (applicable in V200R020C10 and later versions) PDC1000S56-CB (1000 W PoE DC Power Module) (applicable in V200R021C00 and later versions) PAC600S56-CB (600 W PoE AC&240 V DC Power Module (Back to Front, Power panel side exhaust)) (applicable in V200R021C10 and later versions)	-	-

Port Description Description Description Description Description Description

10/100/1000BASE-T port

A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s, and must use an Ethernet cable. Table 4-1317 describes the attributes of a 10/100/1000BASE-T Ethernet electrical port.

Table 4-1317 Attributes of a 10/100/1000BASE-T Ethernet electrical port

Attribute	Description
Type de connecteur	RJ45
Standards compliance	IEEE802.3, IEEE802.3u, IEEE802.3ab
Mode fonctionnant	10/100/1000 Mbit/s auto-sensing
Maximum transmission distance	100 m

10GE SFP+ optical port

A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. Table 4-1318 describes the attributes of a 10GE SFP+ Ethernet optical port.

Table 4-1318 Attributes of a 10GE SFP+ port

Attribute	Description
Type de connecteur	LC/PC
Optical port attributes	Depend on the optical module used
Standards compliance	IEEE802.3ae
Mode fonctionnant	GE/10GE auto-sensing

Port Console

The console port is connected to a console for on-site configuration. The port must use a console cable. The console port is used when a switch is powered on for the first time. For details about the attributes of a console port, see Table 4-1319.

Table 4-1319 Attributes of a console port

Attribute	Description
Type de connecteur	RJ45
Standards compliance	RS-232
Mode fonctionnant	Duplex Universal Asynchronous Receiver/Transmitter (UART)
Baud rate	9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s Default value: 9600 bit/s

Port de gestion ETH

You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely. The port must use an Ethernet cable. You can choose to download the software package through the ETH management port in the BootLoad menu. File transfer through the ETH management port is faster than transfer through the console port. Table 4-1320 describes the attributes of an ETH management port.

Table 4-1320 Attributes of an ETH management port

Attribute	Description
Type de connecteur	RJ45
Standards compliance	IEEE802.3
Working Mode	10/100 Mbit/s auto-sensing
Maximum transmission distance	100 m

In V200R012C00 and later versions, you can log in to the switch that contains the ETH management port for the first time through the ETH port. For details, see "First Login to a Switch" in the Configuration Guide - Basic Configuration. If you have logged in to the switch for the first time by pressing and holding the MODE button for 6 seconds or longer and saved the configuration, the default configuration on the ETH port will be cleared. In this case, you cannot log in to the switch for the first time through the ETH port. You are advised to log in to the switch for the first time through the ETH port.

Port USB

The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0.

USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. Switches support a maximum of 128 GB USB flash drives.

Indicator Description

The S5731-S24P4X has the same types of indicators as the S5731-S48P4X. For details, see Indicator Description.

Power Supply Configuration

The switch is a PoE switch and supports two power module slots, each of which can have a 1000 W PoE or 600 W PoE power module installed. Pluggable AC and DC PoE power modules can be used together in the same switch.

Table 4-1321 Power supply configurations

Power Module 1	Power Module 2	Puissance disponible de PoE	Maximum Number of Ports (Fully Loaded)
1000 W AC (220 V) 1000 W DC	- - - - -	760 W	802.3af (15.4 W per port): 24 802.3at (30 W per port): 24
1000 W AC (110 V)	- - - - -	665 W	802.3af (15.4 W per port): 24 802.3at (30 W per port): 22
1000 W AC (220 V) 1000 W DC	1000 W AC (220 V) 1000 W DC	1600 l	802.3af (15.4 W per port): 24 802.3at (30 W per port): 24
1000 W AC (110 V) 1000 W DC	1000 W AC (110 V)	Versions earlier than V200R021C10: 1330 W V200R021C10 and later versions: 1520 W	802.3af (15.4 W per port): 24 802.3at (30 W per port): 24
600 W AC (220 V)	- - - - -	Longueur: 380 l	802.3af (15.4 W per port): 24 802.3at (30 W per port): 12
600 W AC (110 V)	- - - - -	95 l	802.3af (15.4 W per port): 6 802.3at (30 W per port): 3
600 W AC (220 V)	600 W AC (220 V)	950 W	802.3af (15.4 W per port): 24 802.3at (30 W per port): 24
600 W AC (110 V)	600 W AC (110 V)	Longueur: 380 l	802.3af (15.4 W per port): 24 802.3at (30 W per port): 12
1000 W AC (220 V) 1000 W DC	600 W AC (220 V)	1330 W	802.3af (15.4 W per port): 24 802.3at (30 W per port): 24

When a switch has two power modules installed, the two power modules work in redundancy mode to provide power for the chassis and in load balancing mode to provide power for PDs.

Dissipation thermique

The S5731-S24P4X uses pluggable fan modules for forced air cooling. Air flows in from the front side and exhausts from the rear panel.

Spécifications techniques

Table 4-1322 lists technical specifications of the S5731-S24P4X.

Table 4-1322 Technical specifications

Article:	Description
Mémoire (RAM)	2 GB
Flash	1 go au total. Pour afficher la taille de la mémoire flash disponible, exécutez the Afficher la versionRe88pl99ace1command.
Temps moyen entre les défaillances (MTBF)	57,21 ans
disponibilité	> 0.99999-0.99999
Port de Service protection contre les surtensions	Mode commun: ±6 kV
Protection contre les surtensions d’alimentation électrique	Utilisation de modules de courant alternatif: ±6 kV en mode différentiel, ±6 kV en mode commun Utilisation de modules d’alimentation cc: ±2 kV en mode différentiel, ±4 kV en mode commun
Dimensions (H x l x p)	Dimensions de base (à l’exclusion des parties dépassant du corps): 43,6 mm x 442,0 mm x 420,0 mm (1,72 po. X 17,4 po. X 16,5 po.) Dimensions maximales (la profondeur est la distance entre les ports du panneau avant et la poignée du panneau arrière): 43,6 mm x 442,0 mm x 448,0 mm (1,72 po. X 17,4 po. X 17,7 po.)
Poids (avec emballage)	8,6 kg (18,96 lb)
Ports de pile	10GE SFP+ ports sur le panneau avant
Le CCF	Pris en charge
RPS:	Non pris en charge
PoE	Pris en charge
Gamme de tension évaluée	Entrée AC: 100 V AC à 130 V AC, 200 V AC à 240 V AC, 50/60 Hz Entrée haute tension DC: 240 V DC Entrée DC: -48 V DC à -60 V DC
Plage de tension maximale	Entrée ca: 90 V ca à 290 V ca, 45 Hz à 65 Hz Entrée haute tension DC: 190 V DC à 290 V DC Entrée DC: -38.4 V DC à -72 V DC
Consommation d’énergie maximale (100% de débit, pleine vitesse des ventilateurs)	Ne fournissant pas la fonction PoE: 121 W Charges 100% PoE: 977 W (PoE: 720 W)
Consommation électrique typique (30% de la charge du trafic, testée selon la norme ATIS)	95 l
Température de fonctionnement	-5°C à +45°C (23°F à 113°F) à une altitude de 0 à 1800 m (0 à 5906 pieds) Remarque: Lorsque l’altitude est de 1800-5000 m (5906-16404 pi.), la température de fonctionnement la plus élevée diminue de 1°C (1,8 °F) chaque fois que l’altitude augmente de 220 m (722 pi.). L’interrupteur ne peut pas être démarrée lorsque la température ambiante est inférieure à 0°C (32°F).
Température de stockage	-40°C à +70°C
Bruit à température normale (27°C, puissance acoustique)	< 62,3 dB(A)
Humidité Relative	5% à 95%, sans condensation
Altitude de fonctionnement	0-5000 m (0-16404 pi.)
Certification:	Certification d’emc Certification de sécurité Certification de fabrication
Numéro de pièce	02353AHX 02353AHX-001 02353AHX-003