Inscrivez-vous maintenant pour un meilleur devis personnalisé!
The Huawei S5735-L8T4X-A1 is a compact Layer 3 switch engineered for high-performance networking in enterprise and campus environments. It provides gigabit access and 10G uplink capabilities, offering excellent flexibility, energy efficiency, and management features for modern network infrastructures.
Below are the detailed technical specifications for the S5735-L8T4X-A1:
modèle: S5735-L8T4X-A1
Numéro de pièce: 98011282
Power Supply: intégré AC power module (non-pluggable) voir aussi:
Les Le Ports: 8 x 10/100/1000BASE-T ports, 4 x 10GE SFP+ ports
Console Port: 1 x RJ45 console port
USB USB Port: 1 x USB 2.0 Type-A
Button: 1 x PNP (Plug and Play) reset/factory restore button
Cooling: Built-in fan with forced air cooling (air in from left/front, out from right)
Dimensions (W x D x H): 300 mm × 220 mm × 43.6 mm
Weight: Approximately 2.5 kg
First Pris en charge Software Version: V200R020C10
The switch includes eight 10/100/1000BASE-T electrical ports using RJ45 connectors. These ports support auto-negotiation and auto-MDI/MDIX, providing seamless gigabit connectivity for end devices such as computers, access points, and IP phones.
The four SFP+ optical ports support both 1G and 10G transmission, enabling flexible uplink deployment. They are compatible with various Huawei-certified optical modules and cables, including:
▪ GE and 10GE SFP+ optical modules (CWDM, DWDM)
▪ SFP+ high-speed copper and AOC cables (1m to 10m)
▪ Dedicated SFP+ stacking cables (for zero-configuration stacking)
The RJ45 console port connects to a terminal for local configuration and troubleshooting. The USB 2.0 port allows firmware upgrades, file transfers, and configuration backups using a standard Clé USB flash (up to 128GB supported).
The S5735-L8T4X-A1 features a built-in AC power supply module. It does not support pluggable or redundant power options, simplifying installation and maintenance while maintaining reliability for small-scale deployments.
The switch uses a forced-air cooling design with internal fans. Air intake occurs from the left and front, while exhaust is directed to the right side. This design ensures optimal thermal performance even under high-load conditions, meeting desktop-class noise standards during normal operation.
▪ System LED – Indicates operating status and fault conditions.
▪ Port LEDs – Display link status, speed, and activity for Ethernet ports.
▪ Stack LED – Shows stacking configuration and link health.
▪ Press for less than 6 seconds: resets the switch.
▪ Hold for more than 6 seconds: restores factory defaults.
Warning: Resetting or restoring the switch causes service interruptions; use with caution.
The S5735-L8T4X-A1 is designed for flexible installation options including desktop placement or rack mounting. The compact chassis fits easily in limited-space environments, making it ideal for small office deployments or edge aggregation points.
▪ VLAN support (up to 4,096 VLANs)
▪ Spanning Tree Protocol (STP, RSTP, MSTP)
▪ Link Aggregation Control Protocol (LACP)
▪ Port isolation and mirroring
▪ Static routing, RIP, and OSPF protocols
▪ ARP and DHCP snooping
▪ Inter-VLAN routing
▪ 802.1X authentication and MAC filtering
▪ DHCP snooping and IP source guard
▪ Port security and ACL-based filtering
▪ Priority queuing and traffic shaping
▪ Bandwidth control and congestion avoidance
▪ Classification and marking based on DSCP/CoS
▪ CLI via console port
▪ Web-based GUI management
▪ SNMP v1/v2/v3 and NMS support
▪ USB-based configuration import/export
▪ Real-time device monitoring
▪ Remote upgrade and file management
▪ Event logging and diagnostics tools
The S5735-L8T4X-A1 supports zero-configuration stacking via dedicated SFP+ stack cables. This feature enables multiple switches to operate as a single logical unit, simplifying network management and enhancing scalability.
Huawei has integrated advanced energy-saving technologies into the S5735-L8T4X-A1. The switch dynamically adjusts fan speeds based on temperature, reducing power consumption and noise. It complies with environmental standards, ensuring stable operation in diverse temperature and humidity conditions.
The switch supports link redundancy through LACP and spanning tree protocols. These mechanisms ensure uninterrupted service in the event of link or device failures, improving overall network reliability.
Ideal for connecting end-user devices in corporate LAN environments, offering gigabit access with secure, manageable, and scalable connections.
Perfect for educational or commercial campuses where a mix of gigabit access and 10G uplink aggregation is required for smooth communication and data transfer.
Its compact form factor and built-in power supply make it an excellent choice for small branch networks demanding high reliability with minimal infrastructure.
▪ Compact design suitable for space-limited environments
▪ High-speed uplinks with 10G SFP+ ports
▪ Advanced security and QoS management
▪ Energy-efficient operation with intelligent fans
▪ Easy management via multiple interfaces
Compared with the S5735-L8T4S-A1, the L8T4X-A1 provides 10G SFP+ uplinks instead of 1G SFP ports, offering higher uplink bandwidth and improved scalability. This makes it more suitable for high-performance access or small aggregation scenarios.
The S5735-L8T4X-A1 meets global standards for electromagnetic compatibility, safety, and environmental protection. It complies with RoHS and WEEE directives, ensuring minimal environmental impact throughout its lifecycle.
Each SFP+ uplink port supports up to 10 Gbit/s, with backward compatibility for 1 Gbit/s modules.
No. The S5735-L8T4X-A1 includes a built-in AC power supply and does not support redundant modules.
No, this specific model (L8T4X-A1) does not provide PoE capability. For PoE support, consider the S5735-L8P4X-A1 variant.
Not at all. The device supports zero-configuration stacking, allowing simple setup using dedicated cables.
The built-in fan ensures efficient cooling under standard ambient temperatures. Adequate ventilation should be maintained for optimal performance.
The S5735-L8T4X-A1 is first supported from software version V200R020C10.
The Huawei S5735-L8T4X-A1 is a robust and efficient Layer 3 switch that combines gigabit access, 10G uplink flexibility, and enterprise-class reliability. Designed for simplicity, energy efficiency, and intelligent management, it’s an excellent choice for enterprises, campuses, and small to medium-sized business networks seeking scalability and performance.
Huawei CloudEngine S5735-L8T4X-A1 (98011282) Switch
Huawei All Series Switches New and Used
For Huawei product list and quote, please visit: https://www.hi-network.com/categories/huawei or contact us at www.hi-network.com (Email: [email protected])
Table 4-1870 Basic information about the S5735-L8T4X-A1
| Article: | Détails détails |
|---|---|
| Description Description Description | S5735-L8T4X-A1 (ports 8*10/100/1000BASE-T, ports 4*10GE SFP+, alimentation ca) |
| Part Number | 98011282 |
| Model | S5735-L8T4X-A1 |
| Première version supportée | V200R020C10 |
| Remarques remarques | Some models cannot be downgraded due to upgrades in components. Therefore, you are advised to run the display system-software information command (available in V200R021C00 and later versions) to check the software version supported by the device before the downgrade. |
Figure 4-663 S5735-L8T4X-A1 appearance
1 | huitPorts 10/100/1000BASE-T | 2 | Quatre ports 10GE SFP+ |
3 | Un port de console | 4 | Un port USB |
5 | Un bouton PNP NOTICE:To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button. | 6 | Vis de terre Remarque:It is used with a ground cable. |
7 | Prise AC Remarque:It is used with an AC power cable. | 8 | Jack pour câble d’alimentation AC verrouillage strap Remarque:The AC power cable locking strap is not delivered with the switch. |
Table 4-1871 Ports on the S5735-L8T4X-A1
| Port | Type de connecteur | Description | Available Components |
|---|---|---|---|
| 10/100/1000BASE-T port | RJ45 | A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. | Ethernet cable |
| 10GE SFP+ optical port | SFP+ | A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. |
|
| Port Console | RJ45 | The console port is connected to a console for on-site configuration. | Console cable |
| Port USB | USB 2.0 Type A | The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0. USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. Switches support a maximum of 128 GB USB flash drives. | USB flash drive |
The S5735-L8T4X-A1 has similar indicators to those on the S5735-L24P4X-A1 except that the S5735-L8T4X-A1 does not have a PoE mode indicator. For details, see the S5735-L24P4X-A1.
The switch has a built-in AC power module and does not support pluggable power modules.
The switch has a built-in fan for forced air cooling. Air flows in from the left side and front panel, and exhausts from the right side.
When working properly at a normal temperature, the device meets the desktop-class noise requirements. However, the fan speed may be high and the noise may be loud during device startup.
This figure only shows the airflow direction and does not depict the actual device.
Table 4-1872 Technical specifications of the S5735-L8T4X-A1
| Article: | Specification |
|---|---|
| Dimensions sans emballage (H x l x p) [mm(po.)] | Dimensions de base (à l’exclusion des parties dépassant du corps): 43,6 mm x 250,0 mm x 180,0 mm (1,72 po. X 9,84 po. X 7,1 po.) Dimensions maximales (la profondeur est la distance entre les ports sur le panneau avant et les pièces qui dépassent du panneau arrière): 43,6 mm x 250,0 mm x 187,0 mm (1,72 po. X 9,84 po. X 7,36 po.) |
| Dimensions avec emballage (H x l x p) [mm(po.)] | 90,0 mm x 370,0 mm x 380,0 mm (3,54 po. X 14,57 po. X 14,96 po.) |
| Hauteur du châssis [U] | 1 U U |
| Chassis material | Metal |
| Poids sans emballage [kg(lb)] | 1,44 kg (3,18 lb) |
| Poids avec emballage [kg(lb)] | 2,08 kg (4,59 lb) |
| Consommation électrique typique [W] | 21.1 W |
| Dissipation thermique typique [BTU/ heure] | 72 BTU/hour |
| Consommation d’énergie maximale [W] | 26,3 l |
| Dissipation thermique maximale [BTU/ heure] | 89,74 BTU/ heure |
| Consommation électrique statique [W] | 14.6 W |
| MTBF [années] | 67.07 years |
| disponibilité | > 0.99999-0.99999 |
| Bruit à température normale (puissance acoustique) [dB(A)] | 43 dB(A) |
| Bruit à température normale (pression acoustique) [dB(A)] | 31,5 dB(A) |
| Nombre de fentes pour cartes | 0 |
| Nombre de emplacements de puissance | 0 |
| Nombre de modules de ventilateurs | 1 |
| Alimentation électrique redondante | Non pris en charge |
| Température de fonctionnement à long terme [°C(°F)] | -5°C à +50°C (de 0 m à 1800 m d’altitude, modules optiques non industriels) -5°C à +55°C (0 m à 1800 m d’altitude, modules optiques industriels avec des distances de transmission inférieures ou égales à 10 km) |
| Restriction du taux de variation de la température de fonctionnement [°C(°F)] | Lorsque l’altitude est de 1800-5000 m (5906-16404 pi.), la température de fonctionnement la plus élevée diminue de 1°C (1,8 °F) chaque fois que l’altitude augmente de 220 m (722 pi.). L’interrupteur ne peut pas être démarrée lorsque la température ambiante est inférieure à 0°C (32°F). La température de fonctionnement varie de -5°C à +45°C (23°F à 113°F) lorsque des modules optiques avec des distances de transmission supérieures ou égales à 70 km sont utilisés. |
| Température de stockage [°C(°F)] | -40°C à +70°C |
| Humidité relative de fonctionnement à long terme [RH] | 5% hr à 95% hr, sans condensation |
| Altitude d’exploitation à long terme [m(ft.)] | 0-5000 m (0-16404 pi.) |
| Altitude de stockage [m(ft.)] | 0-5000 m (0-16404 pi.) |
| Mode d’alimentation d’énergie | AC intégré |
| Tension d’entrée nominale [V] | Entrée ca: 100 V AC à 240 V AC, 50/60 Hz |
| Gamme de tension d’entrée [V] | AC input: 90 V AC to 264 V AC; 45 Hz to 65 Hz |
| Courant d’entrée maximal [A] | 0,8 A |
| La mémoire | 512 MB MB MB |
| Mémoire Flash | 512 MB |
| Port Console | RJ45 |
| Port de gestion Eth | Non pris en charge |
| USB | Supported |
| Le CCF | Non pris en charge |
| Entrée RPS | Non pris en charge |
| Port de Service protection contre les surtensions [kV] | Mode commun: ±7 kV |
| Protection contre les surtensions d’alimentation [kV] | ±6 kV en mode différentiel, ±6 kV en mode commun |
| Niveau de protection contre les infiltrations (antipoussière/imperméable à l’eau) | IP20 - IP20 |
| Types de ventilateurs | Built-in |
| Mode de dissipation thermique | Dissipation de chaleur avec la fan, ajustement intelligent de vitesse de fan |
| Direction du flux d’air | Entrée d’air par la gauche et l’avant, épuisement d’air par la droite |
| PoE | Non pris en charge |
| Certification: | Certification d’emc Certification de sécurité Certification de fabrication |
Tags chauds:
Interrupteurs Huawei
hot products
Inscrivez-vous par courriel maintenant pour le Stock de Promotion hebdomadaire
100% free, Unsubscribe any time!
Add 1: Room 605 6/F FA YUEN Commercial Building, 75-77 FA YUEN Street, Mongkok KL, HongKong Add 2: Room 405, Building E, MeiDu Building, Gong Shu District, Hangzhou City, Zhejiang Province, China
Whatsapp/Tel: +8618057156223 Tél. : + 33 (0) 3 88 88 20: 0086 571 86729517 Tel à HK: 00852 66181601
Courriel:: [email protected]
English
Pусский
Français
Español
Português
