modèle

CE6863E-48S6CQ

Numéro de pièce

02354GCT, 02354GCT-001, 02354GCT-002, 02354GCT-004

Description Description

CE6863E-48S6CQ Switch (48*25GE SFP28, 6*100GE QSFP28, without fan and power modules)

Dimensions with packaging (H x W x D) [mm (in.)]

175 mm x 650 mm x 550 mm (6.89 in. x 25.59 in. x 21.65 in.)

Dimensions without packaging (H x W x D) [mm (in.)]

- Basic dimensions (the depth excludes the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.40 in. x 16.54 in.)

- Le Maximumdimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 446.1 mm (1.72 in. x 17.40 in. x 17.56 in.)

Weight without packaging [kg (lb)]

5.7 kg (excluding optical modules, power modules, and fan modules)

Weight without packaging (full configuration) [kg (lb)]

7.8 kg (17.2 lb) (including AC power modules and fan modules, excluding optical modules, calculated based on the heaviest model if multiple models are supported)

Weight with packaging [kg (lb)]

8.95 kg (19.73 lb)

Weight with packaging (full configuration) [kg (lb)]

11.05 kg (24.36 lb)

Hauteur du châssis [U]

1

Type d’installation

Cabinet Installation

Capacité de commutation

To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.

processeur

4-core, 1.4 GHz

La mémoire

DRAM: 4 GB

Ni Flash

64 MB MB

NAND Flash

4 GB

USB USB

Pris en charge

Mode d’alimentation d’énergie

DC pluggable,AC pluggable,HVDC pluggable

Port Console

RJ45

Downlink Service interface

48*25GE SFP28 (Remarque: 1. 25GE ports can be configured to work at 10 Gbit/s or 1 Gbit/s. Every four downlink 25GE ports form a group, and can be configured to work at 10 Gbit/s or 1 Gbit/s through the command; 2. 10GE LRM/80KM linear optical modules are not supported; 3. 1 m 25GE copper cables and 1 m/3 m/5 m 10GE copper cables are supported, and auto-negotiation of copper cables is not supported; 4. 25GE copper cables can only be used on stack ports and M-LAG peer-link ports.)

Uplink Service interface

6*100GE QSFP28

Note:

1. Each 100GE QSFP28 port can be configured to work at 40 Gbit/s.

2. A 100GE QSFP28 port cannot be split into 4 x 25GE or 4 x 10GE ports.

3. 100GE and 40GE 1/3/5 m copper cables are supported, but auto-negotiation of copper cables is not supported. 100GE and 40GE copper cables can only be used on stack ports and M-LAG peer-link ports. 100G 3/5 m copper cables support only RS FEC. After the non-RS FEC mode is configured, the port enters the error-down state.

Port de Service supportant la fonction de pile

25GE optical ports, and 100GE optical ports

Le CCF

Pris en charge

Consommation électrique typique [W]

226 W (100% throughput, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules)

261 W (100% throughput, short-distance optical modules on all ports, dual power modules)

Dissipation thermique typique [BTU/ heure]

771 BTU/hour (100% throughput, SFP28 high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules)

891 BTU/hour (100% throughput, short-distance optical modules on all ports, dual power modules)

Consommation électrique statique [W]

167 W

Static heat dissipation [BTU/hour]

570 BTU/hour

Consommation d’énergie maximale [W]

384 W

Dissipation thermique maximale [BTU/ heure]

1310 BTU/hour

Number of power modules

2

Alimentation électrique redondante

1+1 sauvegarde

Tension d’entrée nominale [V]

notéAC input voltage range: 100 V AC to 240 V AC; 50/60 Hz

Rated - - - - -48 V DC input voltage range:- - - - -48 V DC to- - - - -60 V DC

Rated input voltage range for 600 W AC & 240 V DC: 240 V DC

Rated input voltage range for 1200 W HVDC: 240 V DC to 380 V DC

Gamme de tension d’entrée [V]

Maximum AC input voltage range: 90 V AC to 290 V AC; 45 Hz to 65 Hz

Maximum - - - - -48 V DC input voltage range:- - - - -38.4 V DC to- - - - -72 V DC

Maximum input voltage range for 600 W AC & 240 V DC: 190 V DC to 290 V DC

Maximum input voltage range for 1200 W HVDC: 190 V DC to 400 V DC

Courant d’entrée maximal [A]

600 W AC&240 V DC power module (PAC600S12 series):

- 8 A (100 V AC to 240 V AC)

- 4 A (240 V DC)

1000 W DC power module (PDC1000S12 series): 30 A (- - - - -48 V DC to- - - - -60 V DC)

1200 W high-voltage DC power module (PHD1K2S12 series): 8 A

Puissance de sortie nominale [W]

600 W (AC&240 V HVDC)

1000 W (- - - - -48 V DC)

1200 W (380 V HVDC)

Certification:

- Compliance with safety standards

- Compliance with EMC standards

- Compliance with environment and environmental protection standards

Protection contre les surtensions d’alimentation [kV]

AC: 6 kV en mode commun et 6 kV en mode différentiel

C.c: 4 kV en mode commun et 2 kV en mode différentiel

HVDC: 4 kV in common mode and 2 kV in differential mode

Types de ventilateurs

enfichables

Nombre de fans

4

Ventilateurs redondants

The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short period of time after a single fan module fails. You are advised to replace the faulty fan module immediately.

Mode de dissipation thermique

Refroidissement à l’air

Direction du flux d’air

Front-to-back or back-to-front airflow, depending on the selected fan modules and power modules

disponibilité

0.9999962836

MTBF [année]

47.81 years

MTTR [heure]

1.95 hours

Noise at normal temperature (27°C, sound pressure) [dB(A)]

- Front-to-back airflow: < 58 dB(A)

- Back-to-front airflow: < 57 dB(A)

Noise at high temperature (40°C, sound pressure) [dB(A)]

- Front-to-back airflow: < 75 dB(A)

- Back-to-front airflow: < 74 dB(A)

Long-term operating altitude [m (ft.)]

≤ 5000 m (16404 ft.)

Humidité relative de fonctionnement à long terme [RH]

5% hr à 95% hr, sans condensation

Long-term operating temperature [°C (°F)]

0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.)

Note: When the altitude is 1800–5000 m (5096–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Storage altitude [m (ft.)]

≤ 5000 m (16404 ft.)

Humidité relative de stockage [RH]

5% hr à 95% hr, sans condensation

Storage temperature [°C (°F)]

-40 °C à +70°C