Inscrivez-vous maintenant pour un meilleur devis personnalisé!
Accueil > soutien > Événements & nouvelles > Hot Products

serveurs

Nouvelles chaudes

S5735-L24T4S-A Datasheet

Jan, 18, 2026 Hi-network.com

S5735-L24T4S-A Datasheet

The S5735-L24T4S-A is an enterprise access switch from Huawei CloudEngine S5735-L series, designed for small and medium-sized campus and branch networks............. It delivers reliable Layer 2 and basic Layer 3 switching capabilities, helping organizations build stable, secure, and scalable network infrastructures. With energy-efficient hardware and flexible uplink options, it meets modern enterprise connectivity requirements.


Hardware Design and Interfaces

Port Configuration

The switch provides fixed Ethernet access ports and high-speed uplinks to support aggregation and core connectivity.
▪ Ports:  24 x 10/100/1000BASE-T Ethernet ports
▪ Uplink Interfaces:  4 x 10GE SFP+ ports
▪ Switching Capacity:  Non-blocking switching architecture

Security and Application Scenarios

Enterprise Use

The S5735-L24T4S-A integrates security features such as access control and traffic protection, making it suitable for office buildings, education networks, and enterprise access layers where consistent performance and secure connectivity are required.


Download Datasheet: S5735-L24T4S-A (98010914) Datasheet.pdf

For more datasheets, please go to the Download tab on each product details page, or search in the Datasheet Download Center.


S5735-L24T4S-A

Version Mapping

Table 4-1140 lists the mapping between the S5735-L24T4S-A chassis and software versions.

Table 4-1140 Version mapping

Les séries

modèle

Version du logiciel

S5735-L

S5735-L24T4S-A

V200R019C00 to V200R024C00 versions

Remarque:

V200R021C01 is not supported.

Appearance and Structure

Figure 4-452 S5735-L24T4S-A appearance

1

Vingt-quatre ports 10/100/1000BASE-T

2

Quatre ports 1000BASE-X

Applicable modules:

  • FE optical module (applicable in V200R021C00 and later versions)

  • GE module optique

  • Module optique GE-CWDM

  • GE-DWDM module optique

  • GE module cuivre

  • 10GE SFP+ optical module (only used for stack connection, a maximum transmission distance of 0.4 km, OSXD22N00 not supported, applicable in V200R019C10 and later versions)

  • 1 m and 3 m SFP+ high-speed copper cables (only used for stack connection, applicable in V200R019C10 and later versions)

  • 3 m and 10 m SFP+ AOC cables (only used for stack connection, applicable in V200R019C10 and later versions)

  • 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking, applicable in V200R019C10 and later versions)

3

Un port de console

4

Un port de gestion ETH

5

Un port USB

6

Un bouton PNP

NOTICE:

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

7

Vis de terre

Remarque:
It is used with a ground cable.

8

Jack pour câble d’alimentation AC verrouillage strap

Remarque:
The AC power cable locking strap is not delivered with the switch.

9

Prise AC

Remarque:

It is used with an AC power cable.

-

-

Port Description Description Description Description Description Description

10/100/1000BASE-T port

A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s, and must use an Ethernet cable. Table 4-1141 describes the attributes of a 10/100/1000BASE-T Ethernet electrical port.
Table 4-1141 Attributes of a 10/100/1000BASE-T Ethernet electrical port

Attribute

Description

Type de connecteur

RJ45

Standards compliance

IEEE802.3, IEEE802.3u, IEEE802.3ab

Mode fonctionnant

10/100/1000 Mbit/s auto-sensing

Maximum transmission distance

100 m

1000BASE-X port

When a 1000BASE-X port uses a GE optical module, it can only transmit and receive data at 1000 Mbit/s and does not support the 100 Mbit/s transmission speed. When a 1000BASE-X port uses a FE optical module, it can transmit and receive data at 100 Mbit/s. When a 1000BASE-X port uses a GE copper module, it can transmit and receive data at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Table 4-1142 describes the attributes of a 1000BASE-X Ethernet optical port.
Table 4-1142 Attributes of a 1000BASE-X Ethernet optical port

Attribute

Description

Type de connecteur

LC/PC

Optical port attributes

Depend on the module used

Standards compliance

IEEE802.3z

Port Console

The console port is connected to a console for on-site configuration. The port must use a console cable. The console port is used when a switch is powered on for the first time. For details about the attributes of a console port, see Table 4-1143.
Table 4-1143 Attributes of a console port

Attribute

Description

Type de connecteur

RJ45

Standards compliance

RS-232

Mode fonctionnant

Duplex Universal Asynchronous Receiver/Transmitter (UART)

Baud rate

9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s

Default value: 9600 bit/s

Port de gestion ETH

You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely. The port must use an Ethernet cable. You can choose to download the software package through the ETH management port in the BootLoad menu. File transfer through the ETH management port is faster than transfer through the console port. Table 4-1144 describes the attributes of an ETH management port.
Table 4-1144 Attributes of an ETH management port

Attribute

Description

Type de connecteur

RJ45

Standards compliance

IEEE802.3

Working Mode

10/100 Mbit/s auto-sensing

Maximum transmission distance

100 m

In V200R012C00 and later versions, you can log in to the switch that contains the ETH management port for the first time through the ETH port. For details, see "First Login to a Switch" in the Configuration Guide - Basic Configuration. If you have logged in to the switch for the first time by pressing and holding the MODE button for 6 seconds or longer and saved the configuration, the default configuration on the ETH port will be cleared. In this case, you cannot log in to the switch for the first time through the ETH port. You are advised to log in to the switch for the first time through the ETH port.

Port USB

The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0.

USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. Switches support a maximum of 128 GB USB flash drives.

Indicator Description

The S5735-L24T4S-A has similar indicators to those on the S5735-L12P4S-A except that the S5735-L24T4S-A does not have a PoE mode indicator. For details, see Indicator Description.

Power Supply Configuration

The S5735-L24T4S-A has a built-in AC power module and does not support pluggable power modules.

Dissipation thermique

The S5735-L24T4S-A has no fans and uses natural heat dissipation.

Spécifications techniques

Table 4-1145 lists technical specifications of the S5735-L24T4S-A.

Table 4-1145 Technical specifications

Article:

Description

Mémoire (RAM)

1 GB

Le Flash

512 mo au total. Pour afficher la taille de la mémoire flash disponible, exécutez the Afficher la versionRe88pl99ace1command.

Temps moyen entre les défaillances (MTBF)

111.94 years

disponibilité

> 0.99999-0.99999

Port de Service protection contre les surtensions

Mode commun: ±7 kV

Protection contre les surtensions d’alimentation électrique

±6 kV en mode différentiel, ±6 kV en mode commun

Dimensions (H x l x p)

  • Dimensions de base (à l’exclusion des parties dépassant du corps): 43,6 mm x 442,0 mm x 220,0 mm (1,72 po. X 17,4 po. X 8,7 po.)

  • Dimensions maximales (la profondeur est la distance entre les ports sur le panneau avant et les pièces saillies du panneau arrière): 43,6 mm x 442,0 mm x 227,0 mm (1,72 po. X 17,4 po. X 8,94 po.)

Poids (avec emballage)

4.08 kg (9 lb)

Ports de pile

Tous les ports 10/100/1000BASE-T ou 1000BASE-X (applicable dans V200R019C10 et versions ultérieures)

Le CCF

Non pris en charge

RPS:

Non pris en charge

PoE

Non pris en charge

Gamme de tension évaluée

  • Entrée ca: 100 V AC à 240 V AC, 50/60 Hz

  • Entrée haute tension DC: 240 V DC

Plage de tension maximale

  • Entrée ca: 90 V ca à 264 V ca, 47 Hz à 63 Hz

  • Entrée haute tension DC: 190 V DC à 290 V DC

Consommation maximale (100% de débit)

34 l

Consommation électrique typique (30% de la charge du trafic)

  • Testé selon la norme ATIS

  • EEE activé

  • Pas de consommation électrique PoE

28 l

Température de fonctionnement

-5°C à +45°C (23°F à 113°F) à une altitude de 0 à 1800 m (0 à 5906 pieds)
Remarque:

Lorsque l’altitude est de 1800-5000 m (5906-16404 pi.), la température de fonctionnement la plus élevée diminue de 1°C (1,8 °F) chaque fois que l’altitude augmente de 220 m (722 pi.).

L’interrupteur ne peut pas être démarrée lorsque la température ambiante est inférieure à 0°C (32°F).

La température de fonctionnement du commutateur est de -5°C à +40°C (23°F à 104°F) lorsqu’il utilise des modules optiques GE SFP avec une distance de transmission de 40 km ou plus.

When SFP+ copper cables or dedicated stack cables are used to set up a stack, the switch can operate in the following temperature range:

  • -5°C to +45°C (23°F to 113°F) (installed in the ventilation cabinet, with the wind speed of at least 40 LFM)

When SFP+ AOC cables or 10GE SFP+ optical modules are used to set up a stack, the switch can operate in the following temperature range:

  • -5°C to +45°C (23°F to 113°F) (installed in the ventilation cabinet shipped with fans with a fan speed of at least 200 LFM)

Température de stockage

-40°C à +70°C

Bruit à température normale (27°C, puissance acoustique)

Sans bruit (pas de ventilateurs)

Humidité Relative

5% à 95%, sans condensation

Altitude de fonctionnement

0-5000 m (0-16404 pi.)

Certification:

  • Certification d’emc

  • Certification de sécurité

  • Certification de fabrication

Numéro de pièce

98010914


tag-icon Tags chauds: Interrupteurs Huawei datasheet

Inscrivez-vous par courriel maintenant pour le Stock de Promotion hebdomadaire

100% free, Unsubscribe any time!

Copyright © 2014-2024 Hi-Network.com | HAILIAN TECHNOLOGY CO., LIMITED | All Rights Reserved.
Our company's operations and information are independent of the manufacturers' positions, nor a part of any listed trademarks company.