Inscrivez-vous maintenant pour un meilleur devis personnalisé!

Carbon monoxide detector placement: Where to put a carbon monoxide detector

28 sept. 2021 Hi-network.com

Carbon monoxide is a gas emitted in the combustion of carbon-based fuels, like wood, coal, and gasoline. Given carbon monoxide's odorless and colorless nature, it's known as the "silent killer". Carbon monoxide can be released from your dryer vent, as well as your furnace, fireplace, or chimney, and with a carbon monoxide alarm (CO alarm), you can be alerted as soon as a carbon monoxide leak is in the air... In the event this happens in your home, the alarm would warn you before reaching life-threatening CO levels.

What Is a CO Alarm?

A CO alarm is a warning system that includes a carbon monoxide detector and a central hub linked up to a professional monitoring station. When the detector, installed in your home (not unlike a smoke detector), senses carbon monoxide, it triggers the system and notifies the monitoring station to alert emergency responders. Alternatively, if the CO alarm is part of a do-it-yourself monitoring system, the CO detector alerts you via text or push notifications when the alarm is triggered. Smart home CO alarms are more advanced, letting you know exactly where in your home a CO leak is happening or what device is causing it, so you can stop the leak before it becomes a health hazard.

Carbon monoxide levels, referred to as "ppm" or  "parts per million", is how many CO particles are in the air. Each ppm unit is equivalent to 1 milligram of the substance per liter of water. 

Where to put a carbon monoxide detector in your home?

Place it in a hallway so that the detector picks up on more airflow in the home. The placement should be near your bedroom so you can hear the alarm if it goes off while you're asleep. Make sure your carbon monoxide detector is at least 5 feet high from the floor if you're placing it on a wall or on your ceiling, as carbon monoxide is lighter than air. However, if you have particularly high ceilings, be sure to place your CO detector on the wall. Don't place your carbon monoxide detector next to your fireplace or furnace to avoid false alarms and avoid your kitchen or heating vents.

What safe and unsafe levels look like

  • 0.5-50 ppm: These levels are seen as low and would take about eight hours of continuous exposure for the toxic effects of CO to appear. These low levels can sometimes happen in a home from a gas stove, furnace, or water heater leak, and the levels can dangerously build up over time. Typically there are no symptoms displayed during that eight-hour period making it hard to detect. However, these levels should trigger a CO alarm after eight hours at 50 ppm or after 10 or more hours at 40 ppm or below. 
  • 50 -150 ppm: Above 50 ppm, exposure becomes more serious and requires immediate evacuation. It can cause a headache within an hour or two of exposure. Under OSHA regulations, 50 ppm is the maximum permissible concentration for workplace exposure.
  • 150+ ppm: These levels are poisonous and require medical attention. This can happen when a vehicle is left running in the garage or if a gas-burning appliance like a gas stove is left on. According to the U.S. Consumer Product Safety Commission, carbon monoxide concentration levels over 150 ppm can cause disorientation, unconsciousness, and even death.

Guide to Your CO Detector

Do:

  • Read and follow the installation instructions from the manufacturer
  • Test the alarm before installing, according to the manufacturer's instructions
  • Install multiple CO detectors if you have a large home

Don't:

  • Place your CO detector where the furniture or curtains block it from adequate airflow
  • Place your CO detector in your kitchen or garage
  • Place your CO detector close to an air vent or ceiling fan where the air is moving too quickly for gas detection

What's Next?

In choosing the best CO alarm system for your home, don't rely on just recognizing a name brand. You have to do your research to ensure you're getting the safest, most cost-effective product on the market. We've reviewed several smart smoke and carbon monoxide detectors and decided that the Nest Protect smart CO detector is the best of the best in terms of the equipment. Factoring in affordability, our top choice is the Roost Smart Battery, which is another smart CO detector that gives you durability. They both detect not just CO but also smoke, so they offer you great value while giving you peace of mind that your home is safe from smoke and carbon monoxide.

Lindsay Haskell is a home security writer. Over the last few months, she has covered medical alert systems, home security, and home automation systems, as well as home monitoring service providers.

tag-icon Tags chauds: Maison & bureau Maison intelligente

Copyright © 2014-2024 Hi-Network.com | HAILIAN TECHNOLOGY CO., LIMITED | All Rights Reserved.